Home Catalog Ordering Info Contact Us Related Links  
Search For
Search by Catalog Part:  
Pressure Relief Valve - #191 Pressure Relief Valve
#191 Pressure Relief Valve
#191 Pressure Relief Valve
These pressure relief valves are precise reproductions of the original Stanley valves, precision machined from cast bronze. Preset to relieve at around 725 lbs.
4-9/16" Long 1/8 NPT threads

Note: The pressure valve can be adjusted; however, the spring will need to be changed for pressure under 400 PSI. To have this done, provide us with the pressure setting needed and we will have the supplier do this reset.

If you have a pressure valve that you want changed out, send it to us along with the pressure setting needed so our supplier can make the adjustment. You will be charged the price charged to us plus shipping back to you.

We will advise time to make adjustment at time of request. Cost will be provided after our supplier receives the unit.

Don't take a chance on an old, worn out valve!

Replace it today and drive with confidence.
#191 Pressure Relief Valve
$259.95 each
Steam Whistle Valve -
#192 Steam Whistle Valve
Features include a stainless steel screen to keep boiler crud off the seat and a replaceable Teflon disc ($7.95) that makes the seal. This disc is easily and quickly replaced should the valve develop a leak after long service. The actuating stem is sealed with a Teflon "O" ring. 1/4" female pipe connections at both inlet and outlet. 2-9/32" between inlet and outlet and 3-3/8" high. Installation instructions and suggestions included.
#192 Steam Whistle Valve
$74.95 each
Teflon O Ring for Steam Whistle Valve - #192-A Teflon Steam Valve
#192-A Teflon Steam Valve
#192A Teflon O Ring for Steam Whistle Valve
Teflon Steam Whistle "O" Ring.

This is the replacement washer for that steam whistle valve you bought from Art Hart in 1992!
#192A Teflon O Ring-Steam Whistle Valve
$9.95 Each
Valve Wheels - 200 A
200 A
Valve Wheels - 200 C
200 C
#200A-C Valve Wheels
Lace pattern valve wheels as used on early Stanleys, Whites and other steam cars. Absolutely authentic shape and thickness, but made from non-tarnishing and rustproof, electropolished 18-8 stainless steel. No nickel plating to go dull, peel off, pit or chip when peening onto valve stem.

#200A: 2" dia. with square hole for 1/4" diameter stem ('03-'05 Stanley)

#200B: 2" dia. with square hole for 5/16" diameter stem (post '05 Stanley)

#200C: 1- 7/16" dia. with round hole for #8 machine screw (used on try-cocks - '04-'09? Stanleys with cast brass water level indicator body)
#200A Valve Wheel
$24.95 each
#200B Valve Wheel
$24.95 each
#200C Valve Wheel
$24.95 each