Vintage Steam
 Products, LLC

#192 Steam Whistle Valve: Features include a stainless steel screen to keep boiler crud off the seat and a replaceable Teflon disc ($1.50 ppd.) that makes the seal.  This disc is easily and quickly replaced should the valve develop a leak after long service. The actuating stem is sealed with a Teflon "O" ring. 1/4" female pipe connections at both inlet and outlet.  2-9/32" between inlet and outlet and 3-3/8" high. Installation instructions and suggestions included.

#200A-C Valve Wheels:
Lace pattern valve wheels as used on early Stanleys, Whites and other steam cars. Absolutely authentic shape and thickness, but made from non-tarnishing and rustproof, electropolished 18-8 stainless steel.  No nickel plating to go dull, peel off, pit or chip when peening onto valve stem.

 2" dia. with square hole for 1/4" diameter stem ('03-'05 Stanley)

#200A Valve Wheel.........ea. $18.50 QTY:

     2" dia. with square hole for 5/16" diameter stem (post '05 Stanley)

#200B Valve Wheel.........ea. $18.50 QTY:

     1- 7/16" dia. with round hole for #8 machine screw (used on try-cocks - '04-'09? Stanleys with cast brass water level indicator body)

#200C Valve Wheel.........ea. $18.50 QTY:

#243 Bronze Valve Wheel:   This style was found on the very first Mobile steam carriages as well as on several other early makes.  About 1-3/8" diameter, lost wax cast in bronze using an original as the pattern. Says "open" and "shut" with an arrow through each on the face.  Mounts on a 1/4" stem with a 1/4-20 thread and peening as original.  Very nicely detailed casting.