Vintage Steam
 Products, LLC

Fine Reproductions and Machine Work for Early Steam Powered Automobiles

— Packing Materials —

Item #185 Garlock Packmaster #6 Packing:  1/8" square braided graphite filled Teflon with very low friction. This packing is highly recommended for use in the Stanley fuel pump and has been successfully used by Charlie Johnson's Stanley Shop as an engine packing. It is not recommended for applications exceeding temperatures of 550F.
...............................................................................per foot $1.50
#185 Garlock Packmaster #6  - QTY in feet:

Item #186 Darcoid style 921 Packing: 1/8" square wax filled flax packing. Recommended for Stanley water pumps. Due to the low 
melting temperature of wax it should only be used for cold water applications. 

..............................................................................per foot $1.50
#186 Darcoid style 921  - QTY in feet:

#247 John Crane C1045 Packing:  1/8" square, a firm dense packing that is tightly woven.  Each strand is thoroughly impregnated with Teflon dispersion before braiding.  This serves as a sealant between the individual fibers to prevent leaking through the braid structure.  Good to 500F on water pumps, steam cylinder oil pump, & hand valves that do not exceed 500F

#247 John Crane C1045 Packing per ft. $1.50 Qty in feet:
       

#238 John Crane 1625G Packing:
1/8” square, woven, high temperature, graphite fiber packing. Good for over 1000F on reciprocating parts such as valve rods, piston rods and throttle shafts.
#238 John Crane 1625G ..per ft $1.85 Qty in Feet:

[Home] [Catalog] [Ordering Info] [Contact Us]

[Related Links] [Downloads]

Copyright © 2006 Vintage Steam Products, LLC

Website:  Breezy Hill Designs