Vintage Steam
 Products, LLC

Fine Reproductions and Machine Work for Early Steam Powered Automobiles

— Brass Era Car Accessories —

#270 - 272 Directional signal and brake light control unit:
If you drive your early car a lot you can appreciate the convenience and security modern directional signals and brake lights can add to the pleasure of enjoying your pride and joy on the road. This state of the art unit, available in either 6 volt or 12 volt configuration, will control your directional signal and brake light system using a hidden, miniature signal switch (included) to control both signal and braking through the same bulb filament like many modern cars. You must supply your own lamps and brake light switch. The kit features:  compact size, fused, printed circuit control box electronics (which can be hidden anywhere in the car), miniature toggle style signal switch, audible turn signal indicator (buzzer), and complete wiring instructions. Works with either 2 bulbs at the rear or 4 bulbs for front and rear signals. Install one today and take some of the apprehension out of driving your antique in modern traffic.

#270 Directional Signal for 6 volt................. each $59.95 QTY:
#271 Directional Signal for 12 volt............... each $59.95 QTY:
#272 Optional miniature 4-way flasher switch........ $4.00 QTY:

#246B and 246N Brass Valve Stem Cover:
A copy of an original cover with a 1907 patent date. However, this cover is unique in that it will NOT fit a brass stem tube. It has a special adjustable insert inside that is made to use with RUBBER STEM tubes. Simply remove the plastic dust cover on your rubber stem tube and replace it with this authentic looking brass cover. Now you can use less expensive rubber stem tubes and avoid the problems associated with brass stem tubes such as leakage and blowouts due to poor vulcanization between the stem and the tube. Each unit comes finely polished, complete with the adjustable insert to adapt to different stem lengths and a rubber washer to prevent damage to the paint on the felloe or rim. 

#246B Polished brass............... each $15.95 QTY:
#246N Nickel plated brass.......... each $18.95 QTY:

Click here to send dimensions.

#325 Luggage Rack:
A faithful reproduction of the “Standard” rear mounted, double folding rack popular over 80 years ago. Constructed from 3/16” X 1” and 1/8” X 1” hot rolled steel and riveted together with round head steel rivets. Each unit is custom made to dimensions from your car so the luggage surface will be parallel to the frame, yet will fold up close under the overhang of the rear seat. Sent as made with no finish (you must sandblast and paint). To use this rack you must have a touring car with some rear seat overhang a the back such as found on the Stanley model F and model 70. Send for info sheet on dimensions required from your car before ordering. 

#325 Luggage Rack each $450.00
QTY:

Gradometers: Advertised at the time as: "A simple instrument that will enable you to determine at a glance the grade percent you are ascending or descending".  Two styles are available, both of which are lost wax cast in brass using originals as the pattern and are highly polished.

#273 Style 1: is a copy of a gradometer widely advertised as early as 1903 by the Adams Company of Dubuque, Iowa and uses a convex curved bubble level and scale. It is 6-3/4" long and mounts to any horizontal surface with two screws (not included).  

#273 Gradometer Style 1 each $135.00 QTY:

#274 Style 2 is a copy of a French made gradometer sold in this country which uses a concave curved level tube with a steel ball instead of a bubble inside to indicate the grade.  It is 5-1/4" long and mounts to any horizontal surface with two screws (not included).  

#274 Gradometer Style 2 each $175.00 QTY:

#263 Stanley Deck Latch:  1909 - 1912, used to secure the rear deck of roadsters.  The latch is curved to fit the rounded edge of the lid, while the catch mounting is flat to attach to the vertical panel.  Cast in brass using an original as the pattern.  Highly polished.                      

#263 Stanley Deck Latch each $130.00
QTY:

#264 Rubber axle buffer:  Faithfully reproduced by Mike Roach, these  axle buffers are cast in tough, oil resistant, 80 durometer Urethane rubber which will last considerably longer than the original natural rubber.  This style has been found on many unrestored 1910 - 14 Stanleys as well as other cars as they were offered by after-market suppliers.  They are 1-1/2" wide, 3" long at the base, and 2-1/2" high and come complete with a 24" strap to secure to the axle and spring. Other strap sizes can be made if necessary. They are supplied as a set of four.                                  

#264 Rubber Axle buffer set of 4 $295.00
QTY:

[Home] [Catalog] [Ordering Info] [Contact Us]

[Related Links] [Downloads]

Copyright © 2010 Vintage Steam Products, LLC

Website:  Breezy Hill Designs